例句與用法

1. In general these two pins should be joined together and to the analog ground of the system
   通常，這兩個引腳應該就近連接后再接模擬地。
2. The labels " analog ground " and " digital ground " on these pins refer to the parts of the converter to which the pins are connected , and not to the system grounds to which they must go
   引腳標記說明該引腳已連接到芯片內部的哪個部分，并非要把該引腳連接到電路的哪個參考點。
3. To accept the current signal from high negative voltage circuit , the analog ground is raised to a certain positive voltage , which makes it possible for the signal amplitude to be compressed at the same time of its polarity reversion . a pi control program special for laser gyro current control is brought forward according to the conventional pid control method , in which the control signal is figured out corresponding to the difference between the sample and the reference value by turn of proportion - short step integral - long step integral . and at the end of this paper , a comparison of system performance on different conditions is made and the key elements influencing system performance are educed
   利用集成a / d 、 d / a轉換器的新型芯片aduc824 ，實現了電流(電壓)采樣?數據處理?電流控制的閉環控制結構；地電位的抬升解決了a / d轉換器對負高壓回路電流采樣時的輸入范圍匹配問題；控制信號反相的同時進行幅度壓縮，使得輸出調整電壓的分辨率提高；根據常規的比例?積分?微分( pid )調節模型，針對陀螺系統的特性，給出了一種可以滿足系統要求、據采樣值偏差大小進行的比例?大步長積分?小步長積分、分層次比例?積分算法；不同條件下系統穩流性能的對比、分析在論文最后給出，并據此找出了決定該系統穩流精度的關鍵因素，提出了系統的改進意見。